|
|
Post by 74redcourier on Jan 23, 2016 16:13:13 GMT -8
Looking for 1st Gen front disc brake conversion parts. Prefer new or good used parts from south, southwest or west.
Denver Preston
denver.preston@gmail.com
Cell/Text (260) 585-0332
|
|
|
|
Post by chip on Mar 25, 2016 13:17:40 GMT -8
This post is a little old, so I don't know if you are still looking. But . . . When I got serious about the brake swap on my '73 I just started shopping junk yards on the web. Finally found a yard in Oregon that had a '79 with the front disc parts still on it. I got the hubs and it was pretty cheap (can't remember but about $100 I think). I bought B2000 spindles on e-bay, but decided not to use them because they require a different tie rod end. The stock '73 spindles work just fine. Everything else I was able to buy new or rebuilt from Rock Auto - calipers, rotors, bearings etc. all available. I found the back-plates NOS on e-bay, that took the most time and patience. There are even slotted/vented rotors available for it if you hunt a little. Bottom line, you have to look and look and look. I haunt e-bay every couple of days and scroll through all of the Courier NOS listings. Never know what you will find. |
|
|
|
Post by aaronwarrenscheetz on Mar 7, 2017 0:30:09 GMT -8
You can also do a rear disc upgrade , isuzu rodeo and have your hubs machined down.
|
|
