|
|
Post by Richie on Sept 5, 2021 11:11:10 GMT -8
So I found a Derale fan that looks like it would fit. It's a 10" that is 2 1/16 thick, but it's like 80 bucks. Might have to bite the bullet and get one, I couldnt fit the 12" fan in the front of the radiator without cutting some metal. The Derale part # is 16110, hope this helps someone in the future.
|
|
|
|
Post by Richie on Sept 10, 2021 18:57:41 GMT -8
I started a new thread called Electric fan Options since this thread seems to have changed topics
|
|
pishta
Junior Member
Posts: 21 
|
Post by pishta on Nov 14, 2021 13:14:57 GMT -8
could always use a clutched fan from some other app. Those wont spin 100% unless they are really hot.
|
|
pishta
Junior Member
Posts: 21
|
Post by pishta on Nov 14, 2021 16:03:32 GMT -8
As for the exhaust, the try-Y that the original manifold offers is a very good design for low end torque, where the truck is supposed to produce the most power. a 4 into 1 header maximizes higher RPM power over a try-Y design. Your best bet is to get the backpressure reduced after the stock manifold, ie a larger pipe or a less restrictive muffler.
|
|
